Why Professional Intervention is a MUST for iPhone Home Button Replacement?
When it comes to repairing or replacing iPhone buttons, you have to be careful. Remember, it is not anybody’s job and only a trained and qualified professional will be able to fix the issue.
The reason being, there are specific steps that these professionals take to solve the issue and here they are:
1st Step: Opening Mechanism 1
The professional will insert the flat end of the spudge into the tiny gap. The watertight adhesive that holds the display in its place is extremely strong and thus, creating this initial gap will take application of a significant amount of force. However, the technicians who are into iPhone home button replacement in Gold Coast are trained enough to overcome that challenge. They would rock the screen up & down to weaken that adhesive, till the spudger can be inserted inside. They may also heat the lower edge of your iPhone as that helps softening of the adhesive that secures the display, making it easier to open the button. In other cases, they even use suction cups to lift the screen.
2nd Step: Opening Mechanism 2
Depending upon the situation, they would follow a 2nd opening procedure. At first, they will slide spudge into the iPhone edges, starting from the button and twist the spudger to widen the gap between the rear case and the display. Then they will pull the display assembly slightly away from the phone’s top edge, from disengaging the clips that hold the display assembly in its place. Now the professional will open the iPhone by swinging its display up from the left, just like the back cover of any book. Now they will slide the edges of the spudger right from the bottom.
3rd Step: Disconnecting the LCD Display and the battery
Now this can be done in various ways. The professionals can remove the four tri-point Y000 screws that secure the lower connector bracket. There are three 1.2 mm screws and a single 2.4 mm screw. They can use a spudger point for lifting the battery connector out of the logic board socket.
4th Step: Removal of the Home Button
Finally, once the front panel has been successfully removed by the professional who is into iPhone home button repairs in Gold Coast would remove and replace or repair the home button.
For that, the professional will disconnect the flat cable connection by using the tip of the nylon spudger. Then the pro will use a heat gun for loosening the glue that holds the button to the cable. This will be followed by the prying of the cable using a nylon spudger or a plastic pick. The then home button is pressed gently till it pops out of its socket. This is followed by replacement of faulty buttons with a new one.
Thus you see, there are specific tools used and steps taken by the experts. That’s why you need to opt for a professional for replacement or repair of the iPhone home button.
Comments
Post a Comment